Rise Ltd, recently sold, delivered and installed a Harris Badger baler for plastic WEE scrap to Greece.
The machine was dismantled and shipped to Greece, then installed and reprogrammed on site. The US wire tie strapper was also commissioned on site.
The customer is very pleased with their new piece of equipment, and it was working a full production on Plastic WEE scrap, paper, and plastics before the engineer had left the site.
Please have a look at the CONTAINER Press Shear 550T in action.
RISE have now successfully completed refurbishment of Lollini baler, which is now fully automated with a touch screen plc and bale pressure adjustable for different products. Customer is fully satisfied and we are looking forward to our future projects.
If you require a quotation for repairs or refurbishment please contact us at firstname.lastname@example.org
RISE recently repaired a SERAM counterbalance crane. The crane was suffering from a lack of performance and the fault was traced to a damaged rotating group within the pump. A replacement was sourced and the crane was back into service within a few days.
Please have a look at a short video of the Used HDPE pelletizing line in action. More information about the machine is available in the “Recycling Machinery” section or alternatively contact us at email@example.com
Do not miss out on the following machines available for immediate sale. If you are interested in any of the following, please do not hesitate to contact us at firstname.lastname@example.org
90/20 twin chamber
Fully automatic Bode horizontal baler
Small polystyrene compactor (150×150)
Vertical mill size baler
This Single Shaft Shredder is suitable for hard plastic and wood. Fitted with a Flender reduction gearbox, the shaft speed is reduced to keep the noise and power consumption to a minimum, whilst achieving maximum output.
The rotor is fitted with multiple concave faced cutters enabling them to be turned or changed as required to minimise down time and maintenance costs.
There is a hydraulic ram fitted to the feed box which allows for adjustment of force and cutting pressure dependant on the material.
A classifier screen is fitted on the discharge side of the rotor to control the output size of the shredded material. The screen can be between 15-100mm on request.
The open front design allows the screen to be removed quickly and easily to facilitate cleaning between different material types and maintenance to the rotor cutters. Ideal for use on wood and plastics but can be utilised for other materials
For price enquiries please contact email@example.com
The Raptor R1700 Contra Rotating Shredder is available for immediate sale. The machine is suitable for shredding tyres, aluminium, hard plastic and light iron.
The Raptor R1700 Contra Rotating Shredder comes with 400Hp Diesel Driven System, Oscillator,Conveyor c/w overband magnet and radio remote control.
The Raptor R1700 Contra Rotating Shredder has been fully refurbished and is available for viewing.
If you are interested in the Raptor R1700 Contra Rotating Shredder, please contact firstname.lastname@example.org for further information.
RISE ltd currently have used mPulse hand-held portable metals analyser available for sale.
The mPulse is a hand-held portable metals analyzer which uses a powerful micro-laser beam. The laser causes a high temperature plasma to be formed on the surface of the test piece and the light generated indicates the chemical composition of the sample. Tests take just over 1 second. The resulting chemical analysis and alloy name is displayed on a large, touch screen, display. mPulse operation is completely ‘point-and-shoot ’– there are no program selections to make or electrodes to clean. mPulse does not discriminate between metal types – light elements are analyzed as easily as heavier elements.
The only button on the mPulse is the trigger which is used to power-up the instrument and fire the laser. After switching on, a safety key-code must be entered by the user and there is a short warm up time before the laser will fire
The nose of the mPulse should be placed against the sample and the trigger held until the result is displayed. All other operations are simple ‘Icon-Driven’ applications which can be selected on the large, touch-screen, colour display directly facing the user.
There are single and multi-test operations with statistical precision data. The pre-loaded alloy table is extensive and can be amended by the user. Communications include Bluetooth, a removable flash drive and a remote safety interlock. Power is from a rechargeable battery pack which will provide up to 250+ tests from full charge. Battery packs can be quickly swapped to maintain operation.
The mPulse can be used to test large or small samples including turnings and granules. The laser scans the surface of the sample and will ‘bounce’ repeatedly across tiny samples to optimize the analysis. Samples can be held where convenient because the laser is microscopic, non-penetrating and cannot be felt. mPulse is a ‘surface analyzer’ so test pieces should be clean but no specific sample preparation is normally needed
Anodized surfaces will usually be burnt through by the laser
Rise Ltd are proud to announce the completion of another baler refurbishment. Having been contacted by a cardboard packaging company to investigate issues with their baler, the decision was made to remove the machine to our workshop facility and carry out a complete reline. The tie knives were refurbished and a new cutting blade was manufactured. The existing floor had suffered fatigue which was replaced and strengthened.
The machine was then tested and re-installed, giving the plant a new injection of life.
Contact Rise Ltd for all your on site and workshop repairs on 01242 532240 or email@example.com
Do not miss out on our new vast range of used machinery we now have available for sale. All machines are available immediately and can be seen working.
If you are interested in any of the below, please have look at our Recycling Machinery section or contact us for more details and price enquiries at firstname.lastname@example.org
RISE have a new arrival in our used machines for sale. Do not miss out on Copex Shear 900Tonne with 1000Tonne pressure boost! The machine has been fully refurbished by Copex in 2007. In addition to this, the Copex Shear 900T had fully relined box in 2013. The Copex Shear 900T is working and is available immediately ex site UK. Viewing the Copex Shear 900T highly recommended!
Please have a look at the Harris TGS 320 Heavy Duty in action and the transformation following its refurbishment.
For further information and price enquiries please contact email@example.com
Rise Ltd have completed the partial reline and successful installation of another Harris TGS 57 baler for APM Metals. The machine is a recently acquired model that has a PLC controlled hydraulic power unit that is extremely efficient giving significant power savings over the original setup and increased production due to the very quick bale time. Bale density can be adjusted via a touch screen to give full flexibility.
Contact Rise Ltd for all your on site and workshop repairs on 01242 532240 or firstname.lastname@example.org
Rise, as a sole UK agent for Metpro Intenational, are proud to announce that they have successfully completed the installation of a new Metpro 1120 Pre-Shredder at Rivergate Scrap, Portland, Oregon.Weighing in excess of 90 Tonnes, the Metpro 1120 Pre-Shredder was shipped from the UK and assembled during the night on site. This meant that Rivergate Scrap could continue with normal operations during the daytime and resulted in the customer not losing any production time. The entire installation and commissioning was completed within three weeks and has already made a significant contribution to the yard, both increasing the tonnage produced on a daily basis through their fragmentizer and reducing the wear. The Metpro 1120 Pre-Shredder has also eliminated the need for pre-shearing of material, prior to shredding, and has removed explosions within the hammermill fragmentizer.
RISE would like to introduce MW 808 motor wrecker. MW 808 motor wrecker can cut motor body and separate copper coil. Cutting knife has two sizes and can cut max. 200mm of motor. After cutting motor body in two, place half of body on the coil separator table and by adjusting coil lifter on the copper coil around, lift up coil. Hydraulic-pressured cutting knife can cut various steel scrap and separate steel scrap of different material composition.
Should you be interested in the MW 808 motor wrecker, please contact us at email@example.com
RISE have headed into October in full speed. We are currently working on a project for our established client, who had a misfortunate start of the month. A fire on their yard caused considerable damage and RISE are working hard to get all the machinery up and running within the next 4 weeks to help minimise disruption to the business. We will keep you updated about our progress.
Harris TGS25 Baler has found a new owner. One of our clients in Warwickshire invested in the Harris TGS25 Baler supplied with electric power pack. Harris TGS25 is ideal for baling factory clips and skeletons, copper-wire and sheet, soft alloys of stainless sheet, low alloy aluminium sheet, shapes and wire.
The machine is undergoing minor alternations to our usual high standard prior to delivery to site. If you are interested in Harris balers or other recycling machinery, please do not hesitate to contact us at firstname.lastname@example.org
ISS Safety have taken delivery of their plastic injection moulded tool tilter modified by RISE.
The tool tilter has undergone several alternations including increasing the capacity of the machine to 20 Tonnes, extending it to suit the orientation of the new tool and reducing the stress on the hydraulic cylinders. RISE designed, manufactured and installed a dedicated hydraulic power pack and new larger cylinders and cylinder brackets.
One of our most recent projects for E.ON is a good example of our flexible approach in providing bespoke solutions to customer requirements.
Ironbridge Power Station recently underwent modification to run on 100% biomass (wooden pellets). There was a requirement to top up the conventional rail bulk wagon loads with containerized rail deliveries. RISE was able to modify an existing proven solution for container unloading and deliver the complete package in four weeks to enable an additional 15000 Tonnes of Biomass to be unloaded into the existing fuel handling facility every month.
The RISE container tilter designed for the easier loading and unloading of containers is available for rental as well as for sale. Please contact us to find out more.
We wish you all the best for 2013 and send our kindest regards for the festive season.
The latest video of our TGS25 Baler for sale from the UK. This baler efficiently processes plastics, metals and cardboard.
The delivery and installation of a container tilter for Hinkcroft Transport was a success- although the machine has been supplied to fit the standard 20ft containers parts are available to accept a 40ft conversion when needed. Here are some images from the project and we look forward to seeing the 40ft extension in action:
We consider this equipment an essential addition to the collection of anybody processing scrap metal and the used machine is available ex-stock for immediate delivery at an affordable £3995.
Please see the latest video for a glimpse of our alligator shear in action.
New video of the RISE 415V 3.75kW Cable stripper in action:
In addition to the RISE alligator shears available both new and second hand we now provide Mistra Alligator shears. See the shears in action here:
From October RISE are introducing to our range a number of machines for the recycling industry. Our new cable stripper machines have a capacity of up to 55mm cable and are a cost effective solution to an essential part of scrap handling. In addition to these we are providing several new shears for sale. Available either new or second hand (including a 12 month warranty) we are happy to discuss your material handling requirements from our UK office.
Last week Rise Ltd teamed up with Metpro International and Tufplate Engineering to participate in the Recycling Waste Management exhibition 2012. Showcasing a new stand for this year, RWM was a huge success. We would like to take the time to thank all those who discovered more about our machinery and services by visiting the stand and wish you all a lucrative year to follow.
We are excited to announce our new and wider range of ex-works balers. Many of these have been flexibly priced to take into account both re-worked and non re-worked condition.
Please find a complete list of the new balers available in our machines section http://www.rise-ltd.co.uk/?portfolio=additional-balers
Rise-Ltd have just completed a successful installation for MDJ light brothers. The pre-shredder is already in use producing fantastic material from baled and non-baled materials.
We are pleased to announce that we will be able to supply a large range of cable stripping machines for sale with a capacity of between 1mm-50mm. Please direct your enquiries to Sales@Rise-Ltd.co.uk. Each cable stripping machine has been used in the UK to process scrap materials.
RISE will be exhibiting at the RWM Exhibition that will be taking place from 11 to 13 September 2012 at the NEC Birmingham UK.
• Tue 11 Sep: 09.30-17.30
• Wed 12 Sep: 09.30-17.30
• Thu 13 Sep: 09.30-16.30
Visit us on stand 19W29
We hope to see you there!
The new 840 Pre-Shredder being built for MDJ Light Brothers is nearing completion. The hardened steel shafts and teeth are undergoing the time consuming heat controlled welding procedure to ensure their strength is not compromised. The shafts will then be assembled into the shredder body for delivery later this month.
Rise would like to announce the sale of a Metpro International Pre Shredder to MDJ Light Brothers.
Rise have recently completed a full reline on a two ram waste baler in Hartlepool. The machine was removed from site over night to minimise disruption and relined in 10 days before reinstalling again overnight.
Rise Ltd have launched a new website, bringing you up-to-date news on there products and services. If you have any questions or would like to know more about our products or services, please contact us via our online form. Thank you.